Kirby’s Flooring is a locally owned family business that has been providing our community with quality workmanship and guaranteed installations for more than 30 years.
Ceramic Tile – Routine Care
The entire area should be cleaned and scrubbed with cleaner solution through the use of a cotton mop, cloth, sponge, or non-metallic brush. The entire area should be rinsed with clean water to remove any cleaning solution residue. Remember that you should sweep or vacuum floor areas prior to cleaning to remove any dust or debris. Routine cleaners should never contain hazardous or polluting products including, but not limited to acids or ammonia. Acids can damage the grout and the glazed surface of the tile, and ammonia can discolour the grout.
Unglazed tile should be cleaned routinely with concentrated tile cleaners that have a neutral pH for safe regular use. These cleaners are better suited at removing grease, oils and normal spills from unglazed products. Again these products will vary depending on the application, amount of traffic and the use. The product chosen should also be compatible with cleaning the grout joints at the same time.
Ceramic Tile – Grout Care
Grout is the material used to fill the spaces between the individual tiles. Grout comes in many colors. While color is important to the final finished look of the tile installation, it has little effect on the functionality of the grout. The purpose of grout is, simply, to fill the joint between the tiles and becomes a permanent, integral component of the finished installation.
Most tile installations use cement based grouts. This type of grout should be sealed after installation to prevent the color from staining. The grout should be sealed with a penetrating/impregnating sealer (often called grout sealers) which does not contain silicone, as silicone can shorten the useful life of the sealer. Epoxy grouts, conversely, are chemically cured and acid resistant and, as a result, do not require a sealer. The application of a good quality penetrating/impregnating sealer into the grout joints of a cement based grout will not change the natural color of the grout, but will prevent the penetration of moisture, simplify maintenance, and help prevent staining or discoloration. Only the grout needs to be sealed, not glazed floor or wall tiles. Grout can be sealed after the grout has cured which may take longer in higher humidity environments. A period of at least 7 days should be adequate.
Neither sealing the grout nor using a 100% Epoxy Grout will guarantee against surface build-up or discoloration of the grout. Grout needs to be cleaned on a periodic basis to remove any surface build-up. Routine grout cleaning can be done with a daily concentrated household or commercial cleaner depending on the application. When heavy duty grout cleaning is required, you will need to use a professional strength Tile & Grout Cleaner that is capable of removing grease, soap scum, body oil, mildew stains, algae, and synthetic or acrylic waxes from the grout joints. However, such a product should contain non-polluting chemicals and low VOC levels. This type of product can be purchased through your local professional Floor Covering Dealer.
Grout Color Restoration:
When grout has been stained to the point that it cannot be maintained or returned to its natural color, you can return the grout back to its original color or any other color through the use of a “grout stain”. Grout Stains are epoxy-based products that are specifically designed to penetrate into the grout and seal the surface with a permanent color. Once the grout has been stained there is no need to seal it any further with a penetrating/impregnating sealer. Prior to staining, the grout joint should be cleaned thoroughly to remove any dirt, oils, grease or sealers with a professional strength Tile & Grout Cleaner. This can be purchased from most Home Centers or through your local Professional Floor Covering Dealer.
For routine cleaning, use any non-abrasive cleaning compound recommended for either glass or tile
Metal Signatures/Metal Ages/Urban Metals:
- To clean, use a liquid non-abrasive household cleaner
- DO NOT use scouring pads, steel wool, sandpaper or other abrasive products
- Avoid cleaners containing ammonia, bleach, abrasives, or other hazardous/polluting compounds
- Always test in small inconspicuous area while using a new cleaner to ensure compatibility.
Grout haze is a film that has been left behind on the surface of the tile as part of the final grouting process. Usually this is buffed off the surface after the grout has achieved its initial 12 to 24 hour cure. The removal of the haze is often difficult when buffing with a clean rag or floor machine. Cement based grout haze can be successfully removed with “Sulfamic” acid, which is a mild acid that attacks and breaks down cement smears. There are several products on the market called grout haze removers, which usually contain Sulfamic acid. Sulfamic acid can also be purchased in powder form and mixed with water to different strengths by qualified professionals. Similarly, 100% Solids Epoxy Grouthaze can be removed with an Epoxy Haze Remover. These removers are formulated to safely and quickly remove cured epoxy haze from new tile installations. Their unique formulation will soften most epoxy hazes for easy removal without damaging the grout or tile, usually in one application. Sulfamic acid or grout removers should never be used on Natural Stone products.
Luxury Vinyl Plank & Tile
Special Financing Options
We have financing options over 3, 6, 9 or 12 months - no pay no interest OAC offers. We accept cash, cheque, debit, Visa and Master Card.
Monday to Friday 9:00 am - 5:00 pm
Saturday 10:00 am - 3:00 pm
Sunday - Closed
Please read what these great customers have to say about Kirby's Complete Flooring Centre:
Great people! Great Products! Can't get better service anywhere!
Family operated and committed. If your looking for a durable product and dedicated installers - look no further than a company in your own backyard. I've never ran Into a flooring situation they didn't have a product or solution for. Big box stores are great for glue and lumber, but when you need individual situations assessed, companies who put their name and reputation at stake behind every sale are honestly your best investment....invest in a company who supports their product as if they manufactured it themselves. A true expert will sell you the product you need, a box store will sell you one they have, *just an honest opinion*.
This is the most honest and straight up company I've ever dealt with. Competitive prices, and superior work. Meticulous. A trustworthy place for any home improvement work. Not just flooring. My carpet install and my parent's carpet install was more than we expected. Little extras here and there, and just great people doing the work. Don't waste time going elsewhere. Honestly.
Thanks to the professional care to detail and fast service, our investment property SOLD within days of Kirby's new wood floor installation! We recommend their work to everyone.
A absolute five star rating. The knowledge, flooring selections, friendliness, project time management, and professional family installers made our project an absolute pleasure. In my experience of many contractors I have yet to enter a completed job site with zero deficiency. Well done Brennan, Mark and Iva !
We highly recommend Kirby's Flooring. We recently received prompt, reliable and courteous customer service, from Iva, Mark & Brennan Kirby; as well as an extremely professional installation by Brennan Kirby.
Top notch, professional experience with this flooring company from the sales to the install! No complaints. I would highly recommend them for any of your flooring needs!